
Port of Baltimore, Maryland
Heavy Haul at the Port of Baltimore
For freight forwarders and project logistics teams: Ro/Ro, breakbulk and project cargo out of Dundalk Marine Terminal, trucked from our Dayton, Ohio yard under Maryland permits from our in house permitting team, routed clear of the tunnels, with escorts set for each load. We do not have an office at the port, and we do not have a published Port of Baltimore job to show here.
This page is general information only, not legal advice and not a permit. Rules change often and each state's permit and official rules are the final word. Always confirm limits, escorts, routes and travel times with the state permit office before moving a load. Reliable Transport LLC is not responsible for decisions made using this information.
Port heavy haul
From Dundalk to the jobsite, clear of the tunnels
Reliable Transport LLC runs heavy haul and superload moves across the USA and Canada from our home base in Dayton, Ohio. For a Port of Baltimore load, our in house team files the MDOT SHA permit and any local permit, plans the route and books the escorts, and routes wide and tall loads clear of the Harbor and Fort McHenry tunnels. We are the road carrier after the terminal releases the cargo, not the stevedore and not the terminal operator.
Hauling through other states? Use our permit map and route planner
Open the route plannerInside the port
Dundalk, tunnels, bridges and Beltway hours
Terminal facts come from the Maryland Port Administration and permit rules from COMAR and MDOT SHA, each confirmed by a second source and rechecked November 13, 2026.
Dundalk Marine Terminal
The 570 acre terminal has 13 berths and direct rail access, with 225 acres of automobile storage and 93 acres for Ro/Ro. It handles Ro/Ro, autos, breakbulk and project cargo, with truck access to I 95 and I 695 close by. (Maryland Port Administration, Dundalk Marine Terminal, Maryland Manual, Port of Baltimore, MDOT, Dundalk Marine Terminal project description)
Harbor and Fort McHenry tunnels
No permitted load over 8'W or 13'6"H in the Harbor Tunnel on I 895, and none over 11'W, 14'6"H, 85'L or 55 tons in the Fort McHenry Tunnel on I 95. Every permitted load calls the Maryland Transportation Authority Police at least 1 hour before it reaches a tunnel or bridge. (COMAR 11.04.02.05, toll facilities, MDOT SHA Maryland Route Restrictions (11/10/2026))
Authority highways and the Key Bridge
On Maryland Transportation Authority highways, oversize loads run in daylight from 9 a.m. Monday to noon Friday unless the Authority approves. The Francis Scott Key Bridge on I 695 was struck and collapsed in 2024, and MDTA's current goal is to open the new bridge to traffic by 2030, so port routes are planned without it. Until further notice, MDOT SHA also allows no permitted load over 10'6"W on I 695 between Exit 1 (MD 173) and Exit 2 (MD 10). (MDTA Key Bridge Rebuild, MDTA Key Bridge Rebuild, FAQ, MDOT SHA Maryland Route Restrictions (11/10/2026), COMAR 11.04.02.05, toll facilities, MDOT SHA hauling permits)
Heavy loads to Dundalk
Loads over 120,000 lbs going to or from Dundalk Marine Terminal on I 95 need a Baltimore City permit as well as the state permit. Inbound, they leave I 95 at Exit 59 (Eastern Ave); outbound to I 95 north, they use Exit 57 (O'Donnell St). Over 120,000 lbs and over 14'6"H, the move runs at night only, with a Baltimore City Police escort. (MDOT SHA Maryland Route Restrictions (11/10/2026))
Beltway hours
On the Baltimore Beltway (I 695), loads 12'W or more, 100'L or more, or over 45 tons gross run 9 a.m. to 3:30 p.m. only. (COMAR 11.04.02.06, travel times)
Broening Highway
The Colgate Creek Bridge on Broening Highway takes nothing over 10'W or 80,000 lbs. From Exit 44 on the I 695 Outer Loop to Broening Highway, no permitted load over 12'W, 15'H or 90'L, and any load over 60 tons needs a bridge review. (MDOT SHA Maryland Route Restrictions (11/10/2026))
Seagirt and North Locust Point
Seagirt Marine Terminal is a container terminal operated by Ports America Chesapeake. North Locust Point has two 75 ton gantry cranes that the MPA says give the heavy lift capability for large breakbulk and project shipments. Who sets a piece on our trailer is up to the terminal and the shipper; we do not claim a crane at the port. (MDOT MPA, Seagirt Marine Terminal, MDOT MPA, North Locust Point)
Sources: Maryland Port Administration, Dundalk Marine Terminal; Maryland Manual, Port of Baltimore; MDOT, Dundalk Marine Terminal project description; COMAR 11.04.02.05, toll facilities; MDOT SHA Maryland Route Restrictions (11/10/2026); COMAR 11.04.02.06, travel times; MDOT MPA, Seagirt Marine Terminal; MDOT MPA, North Locust Point; MDTA Key Bridge Rebuild, FAQ; MDOT SHA hauling permits.
Know before you go
Getting a heavy load through the Dundalk gate
Practical access tips for the Port of Baltimore terminals, each from the Maryland Port Administration or Maryland regulations, checked October 10, 2026 and rechecked November 13, 2026. We handle this for you: our team checks every gate requirement with the terminal before your load is booked.
Do drivers need a TWIC card at Dundalk Marine Terminal?
Yes. Anyone entering the secure areas of MDOT MPA terminals needs a valid TWIC card or an authorized escort, and that includes every passenger in the truck. The driver also shows a valid driver's license; paper copies are not accepted. (MDOT MPA, Port Security: Trucks, MDOT MPA, TWIC Regulations)
Is an eModal account needed to enter Dundalk?
Yes. The trucking company, its trucks and its drivers must be registered in eModal Trucker Check before entering Dundalk or Seagirt Marine Terminal. Registration needs a SCAC and an MC or USDOT number, and the MPA says to allow at least 1 hour for new entries to reach its system. (MDOT MPA, Port Security: Trucks, MDOT MPA, TWIC Regulations)
What pass does a cargo truck need at the gate?
A truck picking up or delivering cargo gets a Cargo Gate Pass at a truck access control point, and the driver must be registered in eModal before the truck enters. (COMAR 11.05.03.03, port admission permits, MDOT MPA, Access Control Requirements)
When is the MPA badging office open?
The MPA Access Control Center at 2200 Broening Highway, Suite 205 issues terminal badges and vehicle decals Monday to Friday, 7:30 a.m. to 3:30 p.m., except Maryland state holidays. (MDOT MPA, TWIC Regulations, MDOT MPA, Access Control Requirements)
Which Baltimore terminal handles breakbulk and Ro/Ro?
Dundalk Marine Terminal handles containers, breakbulk, Ro/Ro, autos, project cargo and farm and construction equipment, with 20.1 acres of breakbulk storage and 93 acres for Ro/Ro. (MDOT MPA, Dundalk Marine Terminal, Maryland Manual, Port of Baltimore)
We handle the gate, the permits and the escorts for you
Email LukeTerminal rules change. Always confirm with the terminal before a pickup; we do this on every booking.
Our equipment
Asset based, 8 to 22 axles
We own our trucks and trailers: 16 trucks, all 2025 or newer, and 40 trailers, including our 22 axle Faymonville line. We haul transformers from 70,000 to 300,000 lb on 8 to 22 axle setups, where 300,000 lb means the transformer alone, across the USA and Canada. Every load is reviewed on its own drawing, weight and route.
Maryland rules
Port of Baltimore oversize rules at a glance
The tunnel rules first, then the Maryland rules every port load runs under.
Baltimore and Maryland
Official sources linked| Where | Restriction |
|---|---|
| Harbor Tunnel (I 895) | No load over 8'W or 13'6"H. (COMAR 11.04.02.05, toll facilities, MDOT SHA Maryland Route Restrictions (11/10/2026)) |
| Fort McHenry Tunnel (I 95) | No load over 11'W, 14'6"H, 85'L or 55 tons. (COMAR 11.04.02.05, toll facilities, MDOT SHA Maryland Route Restrictions (11/10/2026)) |
| Dundalk over 120,000 lbs | Baltimore City permit plus the state permit; inbound via I 95 Exit 59 (Eastern Ave), outbound to I 95 north via Exit 57 (O'Donnell St); over 14'6"H as well, nights only with a Baltimore City Police escort. (MDOT SHA Maryland Route Restrictions (11/10/2026)) |
| Legal limits | Without a permit, a load in Maryland can be up to 102" (8'6"W) and 13'6"H, at up to 80,000 lbs. (MDOT SHA Overdimensional Permit Limitations) |
| Escorts | Over 13'W, over 85'L or over 60 tons gross, 1 escort; 14'W or 140'L and over, 2 escorts. (COMAR 11.04.04.03, escorts, MDOT SHA Overdimensional Permit Limitations) |
| Police escorts | 16'W and over, or over 75 tons. (COMAR 11.04.04.06, police escort, MDOT SHA Overdimensional Permit Limitations) |
| Height | At 14'6"H and over, a pole car and a signed height clearance route survey. (MDOT SHA Overdimensional Permit Limitations, MDOT SHA Hauling Permits, height surveys, COMAR 11.04.04.03, escorts) |
| Wide load curfew | 14'W and over, 9 a.m. to 3:30 p.m. (MDOT SHA Overdimensional Permit Limitations, COMAR 11.04.02.06, travel times) |
| Superloads | Over 150,000 lbs gross, with an MDOT SHA engineering review of the route and police and private escorts. Day moves run 9 a.m. to 3:30 p.m.; night moves 8 p.m. to 6 a.m. (MDOT SHA Overdimensional Permit Limitations, COMAR 11.04.02.06, travel times, COMAR 11.04.03.02, excessive weight and size) |
| Over 45 tons | The load may not go faster than 10 mph under the posted limit. (COMAR 11.04.03.02, excessive weight and size) |
| Over 60 tons | File the permit at least 10 business days ahead; over 250 tons, at least 30 business days. MDOT SHA may require a bond. (COMAR 11.04.03.02, excessive weight and size) |
| Broening Highway | Colgate Creek Bridge: nothing over 10'W or 80,000 lbs. I 695 Outer Loop Exit 44 to Broening Highway: no load over 12'W, 15'H or 90'L, and a bridge review over 60 tons. (MDOT SHA Maryland Route Restrictions (11/10/2026)) |
| I 695, Exit 1 to Exit 2 | Until further notice, no permitted load over 10'6"W. (MDOT SHA Maryland Route Restrictions (11/10/2026)) |
Rules change often. We checked these on October 2, 2026 against the official sources linked in each row, and each one against a second source, and rechecked each row against its linked official source on November 13, 2026. Rules we could not confirm twice are left off this page. Our in house permitting team confirms the current rules for every move.
Transformers
Transformers out of the Port of Baltimore
We are an asset based carrier based in Dayton, Ohio. We haul transformers from 70,000 to 300,000 lb on 8 to 22 axle setups, anywhere in the USA and Canada, including out of the Port of Baltimore. 300,000 lb means the transformer alone, not combined gross. Our 22 axle Faymonville line is the setup for the top of that range, and every load is reviewed on its own drawing and weight.

In Maryland, weight drives a transformer permit. Over 45 tons gross the load runs at least 10 mph under the posted limit. Over 60 tons the application goes in at least 10 business days ahead and the move needs an escort, and over 75 tons it also needs a police escort. Over 150,000 lbs gross it is a superload with an MDOT SHA engineering review of the route. Leaving Dundalk, a load over 120,000 lbs also needs a Baltimore City permit and the set I 95 exits, and the Fort McHenry Tunnel takes nothing over 55 tons.
Sources: COMAR 11.04.03.02, excessive weight and size; COMAR 11.04.04.03, escorts; COMAR 11.04.04.06, police escort; MDOT SHA Overdimensional Permit Limitations; MDOT SHA Maryland Route Restrictions (11/10/2026). Checked November 13, 2026.
Our in house permitting and engineering teams check the drawing, the weight and the route before we quote. Read our transformer transport page, then send the drawing, weight, terminal and delivery point on our quote form. We have no published Port of Baltimore transformer job to show here.
Gensets
Genset and generator hauling from the port
We haul generators and genset enclosures on 8 to 22 axle setups from our Dayton, Ohio yard, including pickups at the Port of Baltimore. Our fleet is 16 trucks, all 2025 or newer, and 40 trailers.

The only storage we offer is at our Dayton yard at 7660 W Third St, and only when we can accept the unit. There is no storage at the port and none in Maryland. See generator transport and genset storage in Dayton, Ohio, then send unit count, dimensions, weight and dates on our quote form.
Our moves
Heavy loads we have moved
These moves ran on other routes. They show the size of loads our team permits, routes and escorts. They are not Port of Baltimore jobs.

19'W to 24'W loads
Port of Houston, Texas to Arizona in June 2024, with 5 loads from 19'W to 24'W and 2 loads at 134'L.

207,000 lb dryer drum
Louisville, KY to Richmond, VA in December 2025, at 300,000 lbs gross and 165'L x 13'6"W x 17'H loaded, with a crew of 15.

110,000 lb switchgear building
Houston, TX to Los Angeles, CA in 2025, at 250,000 lbs gross and 185'L x 17'W x 17'H loaded.
Forwarding cargo through Baltimore?
Send the size, weight and ETA. We will tell you what the permit, route and escorts look like.
Request a quote →See every move on our Moves page.
Questions
Port of Baltimore heavy haul questions
Can an oversize load use the Baltimore harbor tunnels?
Not the Harbor Tunnel over 8'W or 13'6"H, and not the Fort McHenry Tunnel over 11'W, 14'6"H, 85'L or 55 tons.
What can Dundalk Marine Terminal handle?
Ro/Ro, autos, breakbulk and project cargo, on 570 acres with 13 berths and direct rail access.
Does a heavy Dundalk load need a Baltimore City permit?
Yes, over 120,000 lbs on I 95 to or from Dundalk Marine Terminal, as well as the state permit. Inbound loads use Exit 59 (Eastern Ave) and outbound loads to I 95 north use Exit 57 (O'Donnell St). Over 14'6"H as well, the move runs at night with a Baltimore City Police escort.
When can wide loads use the Baltimore Beltway?
Loads 12'W or more, 100'L or more, or over 45 tons gross run 9 a.m. to 3:30 p.m. on I 695.
Does a tall Maryland load need a route survey?
Yes. At 14'6"H and over, a signed height clearance route survey goes with the permit application, and a front escort runs a height pole.
Do you have a yard or an office at the Port of Baltimore?
No. Reliable Transport LLC is based at 7660 W Third St, Dayton, Ohio 45417. We haul to and from the port from that yard, across the USA and Canada.
Have you published a Port of Baltimore job?
No. We can show published moves on other routes, including a Port of Houston pickup. A Baltimore job will be added only when Luke clears the facts and the photos.
What does Maryland require for a transformer move out of the port?
We haul transformers from 70,000 to 300,000 lb on 8 to 22 axle setups, where 300,000 lb means the transformer alone. In Maryland, a move over 60 tons gross is filed at least 10 business days ahead and runs with an escort, over 75 tons it also needs a police escort, and over 150,000 lbs gross it is a superload that needs an MDOT SHA engineering review.
Can you store a genset at the port?
No. The only storage we offer is at our Dayton, Ohio yard, and only when we can accept the unit.
How heavy a load can you haul?
We haul transformers from 70,000 to 300,000 lb on 8 to 22 axle setups, where 300,000 lb means the transformer alone. Every load is reviewed on its own drawing, weight and route.
Do drivers need a TWIC card at Dundalk Marine Terminal?
Yes. Anyone entering the secure areas of MDOT MPA terminals needs a valid TWIC card or an authorized escort, and that includes every passenger in the truck. The driver also shows a valid driver's license; paper copies are not accepted.
Is an eModal account needed to enter Dundalk?
Yes. The trucking company, its trucks and its drivers must be registered in eModal Trucker Check before entering Dundalk or Seagirt Marine Terminal. Registration needs a SCAC and an MC or USDOT number, and the MPA says to allow at least 1 hour for new entries to reach its system.
What pass does a cargo truck need at the gate?
A truck picking up or delivering cargo gets a Cargo Gate Pass at a truck access control point, and the driver must be registered in eModal before the truck enters.
When is the MPA badging office open?
The MPA Access Control Center at 2200 Broening Highway, Suite 205 issues terminal badges and vehicle decals Monday to Friday, 7:30 a.m. to 3:30 p.m., except Maryland state holidays.
Which Baltimore terminal handles breakbulk and Ro/Ro?
Dundalk Marine Terminal handles containers, breakbulk, Ro/Ro, autos, project cargo and farm and construction equipment, with 20.1 acres of breakbulk storage and 93 acres for Ro/Ro.
Hauling through other states? Use our permit map and route planner
Open the route plannerKeep planning
More for your Port of Baltimore move
Other port pages
Nearby states
What we haul
For freight forwarders
Cargo landing at Dundalk?
Send the vessel, ETA, piece dimensions, weight and delivery point. We register the gate pickup, file the Maryland permits, plan the route clear of the tunnels and book the escorts, as one asset based carrier.
This page is general information only, not legal advice and not a permit. Rules change often and each state's permit and official rules are the final word. Always confirm limits, escorts, routes and travel times with the state permit office before moving a load. Reliable Transport LLC is not responsible for decisions made using this information.

