Transformer Transport: What to Send for a Quote, and How We Plan the Move

Home › Guides › Transformer transport quote checklist
By Luke Akhmedov, Chief of Operations · Reliable Transport LLC, Dayton, Ohio
Short answer To quote a power transformer move, a carrier needs the shipping drawing, the weight and dimensions of each piece as shipped, the support and lifting points, both site addresses and dates, and who handles loading and offload. Reliable Transport LLC (USDOT 3906954) hauls transformers from 70,000 to 300,000 lbs on 8 to 22 axle setups, with permits and routing in house. Call Luke at 937 684 8392.
160,000 lb gray power transformer on orange skid beams beside a heavy haul trailer at the Obetz, Ohio site, with a crew member in a hi vis vest
Our 160,000 lb power transformer delivery to Obetz, Ohio, December 2024.
70,000 to 300,000 lbsTransformer pieces we haul
8 to 22 axlesSetups matched to the piece
In housePermits, routing, escorts, bucket trucks
Not a brokerOur own trucks and drivers

Why transformers are their own kind of load

A power transformer puts a lot of weight into one tall piece. Federal rules cap gross weight on the Interstate system at 80,000 lbs for the truck, trailer and load together (23 CFR 658.17). Our Obetz transformer weighed 160,000 lbs on its own, twice that whole limit, so it could only move on an overweight permit with enough axles under it to keep every axle and axle group inside the permit and the trailer's rating.

Height is the other half. Transformers are tall, so the trailer and the route are chosen around the loaded height. We run low deck transformer trailers that keep the deck low, so we can handle taller units.

What to send for a transformer quote

ItemWhat we need
Shipping configurationWeight, length, width and height of each piece as shipped. Note removable components and any figures that are not confirmed yet.
Drawing and supportsThe shipping drawing, plus support, lifting and tie down information.
Pickup and deliveryBoth addresses, requested dates, site contacts and any appointment windows.
Site handoffWho loads and offloads, with what equipment. Gate access, turning space and overhead restrictions at each site.

Use the dimensions and weight of each piece as shipped, not an assumed loaded vehicle weight. Piece weight is not the same as the total vehicle and load weight.

How we plan a transformer move

1. Weight first

The piece weight sets the trailer. We choose the axle count and spread so each axle and group stays inside the permit and inside the trailer's legal rating. Load plans are engineered with industry engineering partners and trailer manufacturers, then matched to the right setup from our fleet.

2. Permits and routing in house

Our own team files the permits for every state on the route, and every route is reviewed turn by turn with the driver before the move.

3. Escorts and line lifts

Our own escort vehicles and utility bucket trucks run with the load, lifting overhead lines so tall loads can pass.

4. Delivery to the site

Live GPS Samsara tracking and a dash cam on every truck, with a live share link on request, so your site team knows where the load is until it is set down.

The transformer hanging from red crane slings over the trailer as crew members in hard hats and hi vis vests guide the lift
The Obetz transformer on crane slings over our trailer.

A transformer move we have done

MoveFacts
160,000 lb power transformer, Obetz, OHDecember 2024. Franklin County, southeast edge of Columbus. Permits by our in house team.

See every job on our Moves page.

Shipping a transformer?
Send the drawing, weights, dimensions, pickup and delivery. We will plan the trailer, permits and route.

Transformer transport questions

What do I need to send for a transformer transport quote?The shipping drawing, the weight, length, width and height of each piece as shipped, support, lifting and tie down points, both addresses with dates and site contacts, and who loads and offloads at each site with what equipment.
How heavy a transformer can Reliable Transport haul?Pieces from 70,000 up to 300,000 lbs on 8 to 22 axle setups, matched to the transformer and the permit.
Why does a transformer need an overweight permit?Federal rules cap gross weight on the Interstate system at 80,000 lbs for the truck, trailer and load together (23 CFR 658.17). A transformer that weighs more than that on its own, like our 160,000 lb Obetz unit, moves on an overweight permit with enough axles to keep every axle group inside the permit and the trailer rating.
Is Reliable Transport a broker?No. Reliable Transport LLC is an asset based carrier with its own trucks and drivers, USDOT 3906954, MC 1441035, based in Dayton, Ohio.
Who do I call for a transformer quote?Call or email Luke, Chief of Operations: 937 684 8392, luke@reliabletransportoh.com.

Keep planning

Sources: 23 CFR 658.17; ODOT form OS-1A (Rev. 01/18); our published Obetz move.

This page is general information only, not legal advice and not a permit. Rules change often and each state's permit and official rules are the final word. Always confirm limits, escorts, routes and travel times with the state permit office before moving a load. Reliable Transport LLC is not responsible for decisions made using this information.
Reliable Transport LLC · 7660 W Third St, Dayton, OH 45417 · USDOT 3906954 · MC 1441035 · Luke, Chief of Operations, 937 684 8392, luke@reliabletransportoh.com

Next
Next

Ohio OS1A Permit Conditions: Escorts, Height Poles and Travel Times